I have received PETG filament, dia 1.75mm.
Any suggestions for print parameters.
I have tryed Bed Temp 55C, Nozzle temp 240C, FeedRate 30mm.
The print is not a good one.
Many thanks in advance
I,m using nozzle temp. 215, bed temp. 65. It works on my cr-10 Printer.
Gracias, Carlos! Muchisimas gracias!
I've been using 235 to 245C and 80 for bed and it works for me but as you can tell from the last response, different settings for different printers and each brand of PETG has it's own qualities/flaws.
Good evening '
the default filament thickness is 2.75mm
It is necessary to change in the parameters ..1.75 mm
The machine does its flow calculation from the eppealer and the speed of engine rotation hoops.
You can also test with a small part
Cura 3.5 offers 1.75mm as default diameter. Any way, thank you, filament dia is very important and always should be checked.
Now I have achieved quite better results.
Bed temp - 70C
Nozzle temp - 235C
FeedRate - 30mm/sec
Thank you for sharing your practice, guys
If you don't receive the email within an hour (and you've checked your Spam folder), email us as firstname.lastname@example.org.