Pro-E users (PTC creo)

Created by Selvaraj P on 5 June, 2018

232

discussions

3218

members
Adnan Hussain
Adnan Hussain
31 Mar, 2020 11:20 AM

Hello Dear Friends

I am facing a problem. In Creo 3.0 when I am opening an imported Geometry (Catia File). It is an automotive sheet metal part, only one side part surface received, I needed to add thickness on it and converting in to sheet metal environment and then required un blanking for designing blanking tool.

But part thickness is not being created.

I have just saw this Creo users Forum on face book. I shall be very thankful if anybody could resolved my problem.

Thanking you


 
MVishw
MVishw
Mar 31, 2020

go to model properties

change model accuracy to 0.0001



 
Adnan Hussain
Adnan Hussain
Mar 31, 2020
MVishw go to model propertieschange model accuracy to 0.0001

Thank you very much for your kind suggestion i am checking and let you know.

 
Adnan Hussain
Adnan Hussain
Mar 31, 2020
Adnan Hussain Thank you very much for your kind suggestion i am checking and let you know.

Yet problem is remain same


 
MVishw
MVishw
Apr 1, 2020

I think problem is in surface..

 
Adnan Hussain
Adnan Hussain
Apr 1, 2020

I think your name is manish, did you faced these type of problems earlier? where is you from? i made a video in which actual problem is discussed, please let me know, how can i send a complete video to you? if you can send me your e-mail address so you could better understand my actual problem.

 
Vinith S
Vinith S
Apr 1, 2020

Hi,

Try creating default planes and select one of the plane and thickness icon. So that it can automatically add thickness which it had in previous file.

 
Adnan Hussain
Adnan Hussain
Apr 4, 2020
Vinith S Hi,Try creating default planes and select one of the plane and thickness icon. So that it can automatically add thickness which it had in...


Dear Mr. S Vinith

Thank you for the guidance given to me by you, I am continuously trying to add thickness on the imported Catia Geometry surface in Creo 3.0, but still could not be succeeded. In this respect I have made a video in which the complete problem is being discussed, please provide me your e-mail address so I send video to you.

Thanks & regards

Adnan

 
Dave Martin
Dave Martin
Apr 5, 2020

Have you checked the imported geometry for flaws? You may need to use the Import Data Doctor to clean up the geometry. Here's a video:


https://youtu.be/CaiVYMBD1mM


 
drushtant gaikwad
drushtant gaikwad
Jun 23, 2020

Try to learn about "Import Data Doctor"


Solution to your problem.:

after importing the part/asm in the parent assembly > edit defination to go to import data doctor here you can fill slives/ gaps or edit some failed curves (Reason behind your problem).

i went to same trouble once. this will solve your proble.

if you have any trouble. lets connect on linkedin or email.


regards