Hey buddies i need a dimensional drawing for designing a bycle in Solidworks
Kindly share it here or mail me at
shubc11@gmail.com
Cool project. Have you looked in the Library? There are dozens of bicycle models that have been uploaded.
I did find this bicycle print:
Thanks buddy
Is there any mathematical formula for finding length of top tube, bottom tube, seat tube, etc.?
If you look in many bicycle brands websites, after choosing a bicycle model, for sure you'll find images like the one posted by Serhiy.
I'll leave you with some examples.
https://www.trekbikes.com/us/en_US/bikes/road-bikes/performance-road/domane/domane-al/domane-al-2/p/23522/?colorCode=black - scroll down the page
https://www.scott-sports.com/gb/en/product/scott-scale-920-bike?article=265210008 - click on "geometry"
Etc...
Although you can't use all the measurements they provide, otherwise your sketch will be over constrained. Use first the most important measurements like stack, reach, bb drop, angles of head tube and seat tube, ...
https://grabcad.com/shubham.chaurasiya-1
I am currently doing the same as you, let me give you some advice, what I did apart from looking for measures and ideas on the internet, I got two bicycles that were not used by some friends, with vernier in hand and measure tape, and disarm them, I suggest you do the same , investigate the type of bicycle, the relationship chain and sprockets, among other factors, if you have questions ask me with confidence I have already carried half of the project
thanks for suggestion i will ask you
Thanks it really worked for me
If you don't receive the email within an hour (and you've checked your Spam folder), email us as confirmation@grabcad.com.