How creat mold in SolidWorks?
How work with Mold tool commands. The simple way of creating camera mold.
-
Step 1:
Step 1
First of all add Mold tool command. Open existing part. -
Step 2:
Step 2
Add Scale. Scale depend on material you use. Press OK. -
Step 3:
Step 3
Create Parting line. This part split Core and Cavity. Add special Angle and press Draft Analyze. Colors show faces (negative, positive). Line can be created automatically. Press OK. -
Step 4:
Step 4
Shut Off Surfaces, this close all gaps. -
Step 5:
Step 5
Create Parting Surface. Surface must be larger then mold block. -
Step 6:
Step 6
Create Core and Cavity by Tool Split. Press and select plane in this example it is Front Plane, in this plane create sketch (it will be mold block). Press OK -
Step 7:
Step 7
Enter value of Core and Cavity. Press OK -
Step 8:
Step 8
First Result -
Step 9:
Step 9
Split for independent parts. At Solid Body press right mouse bottom and choose Save Bodies -
Step 10:
Step 10
Save Bodies -
Step 11:
Step 11
Final Result