How to model a Lamborghini Aventador rim on Solidworks?

The steps...

  1. Step 1:

    Front plane -> sketch... we sketch the following shape...

  2. Step 2:

    create an offset plane from front plane.

  3. Step 3:

    another sketch...

  4. Step 4:

    loft the 2 sketches...

  5. Step 5:

    create an offset sketch at the front face,

  6. Step 6:

    extrude cut it, and then draft the inner faces..

  7. Step 7:

    then the top one..

  8. Step 8:

    revolve cut the front face to give it the final shape...

  9. Step 9:

    added some fillets...

  10. Step 10:

    revolve without merging result...

  11. Step 11:

    circular pattern with bodies..

  12. Step 12:

    and finally combine all bodies together.

  13. Step 13:

    revolve withoun merging result

  14. Step 14:

    offset that surfaces,

  15. Step 15:

    cut with surface

  16. Step 16:

    combine.

  17. Step 17:

    cut extrude from front plane...

  18. Step 18:

    again...

  19. Step 19:

    circular pattern...

  20. Step 20:

    added some fillets...

  21. Step 21:

    revolve the tyre...

  22. Step 22:

    fillet...

  23. Step 23:

    create offset surface...

  24. Step 24:

    extend

  25. Step 25:

    cut up to surface..

  26. Step 26:

    pattern and mirror

  27. Step 27:

    cut up to surface again...

  28. Step 28:

    patern...

  29. Step 29:

    And here is the result...

Comments