How you create a mold of a piece in SW ?

21 Jan, 2012 04:09 PM

This is the answer for a detailed tutorial for this question

Step 1:

1 - importing a step file format and click OK
Step 2:

2 - then click on Import Diagnostics
Step 3:

3 - and click on the correct surfaces
Step 4:

4 -And here is the piece with surfaces corrected
Step 5:

5 -is added after the window molding tools
Step 6:

6 - we begin our work by joint lines
Step 7:

7 - you select the aperture plane
Step 8:

8 -and click on analysis of body
Step 9:

9 -we note that there are more colors click on the stop which is between the two colors.
- click the right mouse button and select tangency
Step 10:

10 -we note that lines joints are selected
Step 11:

11 -Here is the line of joints that is blue
Step 12:

12 -we click on the plane attached
Step 13:

13 -we set the plane of the joint in 36 mm
Step 14:

14 -click ok
Step 15:

15 -after we go to the last operation
(kernel - print)
Step 16:

16 -click kernel - print
and click on the plane
Step 17:

17 -after it will automatically insert a sketch
we draw a rectangle that must be below the plane of the joint
Step 18:

18 - Click ok
Step 19:

19 - is taken as the dimensions of the image
Step 20:

20 - and here our mold is created
Step 21:

21 - we hide the parting
Step 22:

22 -moving the upper part
Step 23:

23 - a height of 60 mm
Step 24:

24 - After our piece on Chache
Step 25:

25 - This is our core - stamp
Step 26:

26 - you find the mold here to repeat the tutorial :
http://grabcad.com/library/kernel-print