Pick and place application with KUKA KR16 robot using coppeliaSim and Matlab

.
.
.
.
.
.
.
.

Hi friends , in this tutorial I will show you how to create a pick and place simulation with the 6 DOF robot KUKA KR16 .
Contents :
** V-REP part :
1-Attach a gripper to the robot flange 1:00
2-Add a conveyor 3:51
3-Set the robot in the inverse kinematic mode 7:22
4-Generate an infinite number of pieces 10:14
** Matlab part :
5-Gripper function 13:13
6-Linear move function 15:47
7-Pick and place function 20:30
8- main code 24:33
all the matlab remote API functions are available here :
http://www.coppeliarobotics.com/helpFiles/en/remoteApiFunctionsMatlab.htm#simxSetJointPosition
I hope it's helpful and if you have question , I will do my best to answer them
If you want to do this simulation again , you can download the KUKA KR 16 from here :
https://drive.google.com/file/d/1ZaMG-3bbJN-GHo3lghNYwZNuZD61NDDS/view?usp=sharing
Facebook page :
https://www.facebook.com/Mechatronics-Ninja-1601353846600883/?ref=bookmarks
Thank you for watching.

  1. Step 1:


Comments