Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

0:25 Simulation Start
0:56 Simplify
1:31 Materials
2:02 Constraints
2:58 DOF View
3:23 Loads
4:52 Solve

In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.