Straw on perfume bottles
Use a Swept Base of two concentric circles and a path, or better, use a Swept Base with the circle that creates the body, and a Swept Cut with the smaller circle and the same path as before.
-
Step 1:
Make 3 sketches, I made two sketches on the top plane, each one has a circle in it. And one sketch on the front plane containing a spline.
-
Step 2:
Click on Swept Boss, choose the sketch that contains the larger circle then the sketch that contains the spline.
-
Step 3:
Now click on Swept Cut, choose the sketch that contains the smaller circle then choose the sketch that contains the spline again
-
Step 4:
And you're done.