Tutorial: how to create car rims in Solidworks?
Tutorial - how to make rim
please don't forget to click on ''it worked'' :)
-
Step 1:
Open a sketch and draw a rim profile like this
-
Step 2:
Draw an axis and use revolve command
-
Step 3:
This is the outer part of the your rim
-
Step 4:
Sectioning. use selection view button
-
Step 5:
Draw rims internal part profile
-
Step 6:
Again use the revolve command. and be sure that ''marge result need to be unticked
-
Step 7:
Open a sketch on front plane and draw the profile that will be cutted. This is the most important step to create your own design wheels
-
Step 8:
Use circular pattern command and make your selection according to how many arms you want to do your rim
-
Step 9:
Edit your sketch with using trim command and cut the body. to cut only revolve2 you must select it on marked area
-
Step 10:
Use fillet command and fillet your bodies
-
Step 11:
Drill the rim for screws
-
Step 12:
use your creativity
-
Step 13:
And renders :)) plese click on it worked button if you liked this tutorial:))