Tutorial how to model a propelling pencil (30)
ASSEMBLY
-
Step 1:
open a new assembly file
-
Step 2:
click on insert new parts--browse
-
Step 3:
select part 1
-
Step 4:
part 1 ( I hope you named the files as I said. if not, found the parts that you see below and insert them:)
-
Step 5:
insert part 2
-
Step 6:
click on shown blue surface then click on matte button
-
Step 7:
matte command is activated now as you see
-
Step 8:
click on shown surface of part 1. they will be concentric automaticly
-
Step 9:
now click on shown button. because part 2 is reverse
-
Step 10:
confirm that
-
Step 11:
now move the part by dragging
-
Step 12:
select the surface
-
Step 13:
then select this surface
-
Step 14:
confirm that..
-
Step 15:
insert part 3
-
Step 16:
just drop it
-
Step 17:
insert part 4
-
Step 18:
click on the shown surface and use matte command
-
Step 19:
then click on that surface and confirm it
-
Step 20:
select the surface. ( don't close mate command )
-
Step 21:
select other shown surface and ok
next: http://grabcad.com/questions/tutorial-how-to-model-a-propelling-pencil-31