Unable to create this extruded feature due to geometric Conditions Shle 10 Aug, 2020 12:25 AM I had an extrude cut holes at an angle from a 3d sketch on a curved surface. However, when I tried to increase the diameter, I just the error message above. I am confused, cause I see no tangent intersections between 2 faces. Accepted answer Mr Frienchie Answered on 17 Aug, 2020 03:09 PM well after making the 3D sketch try making reference plane at an angle and then try it out this will solve the problem 1 Other answer MOHAMMED RIZWANUDDIN Answered on 11 Aug, 2020 07:50 PM Create a 2d sketch using reference plane. That might do the job
Unable to create this extruded feature due to geometric Conditions Shle 10 Aug, 2020 12:25 AM I had an extrude cut holes at an angle from a 3d sketch on a curved surface. However, when I tried to increase the diameter, I just the error message above. I am confused, cause I see no tangent intersections between 2 faces. Accepted answer Mr Frienchie Answered on 17 Aug, 2020 03:09 PM well after making the 3D sketch try making reference plane at an angle and then try it out this will solve the problem 1 Other answer MOHAMMED RIZWANUDDIN Answered on 11 Aug, 2020 07:50 PM Create a 2d sketch using reference plane. That might do the job