Design : Heavy Duty Door Hinge
In this tutorial, i will show how to design Heavy Duty Door Hinge. . . as per drawaing.
-
Step 1:
Find Design Data.
-
Step 2:
Hinge part 1 : Draw Cross section as per data.
-
Step 3:
Extrude above section up to 25.
-
Step 4:
Put hole for bolting .. using hole feature.
-
Step 5:
Now we have to draw the sketch as per below shot.
-
Step 6:
Now sub-strac or cut the above drawing.
-
Step 7:
Hinge part 2 : in this step u have to take similary process like from step 2 to step 5 but as per below shot
-
Step 8:
cut the section as per step 6.
-
Step 9:
apply fillet radius 3 in both parts
-
Step 10:
Draw a Pin section.
-
Step 11:
Extrude up to 25.
-
Step 12:
Asswmble it.
-
Step 13:
Hinge is Ready.
-
Step 14:
Design data