How to model Propeller in Solidworks?

Abre

1 Mar, 2012 02:46 PM

Tutorial

1. Step 1:

   Create new plane (plane1), choose right plane as first reference and offset=500mm
   

   

2. Step 2:

   Sketch a elips with width=60mm and height=20mm on right plane like picture below (sketch1)
   

   

3. Step 3:

   Sketch a point on plane1, and make this coincident with the origin point (sketch2)
   

   

4. Step 4:

   Create loft from sketch1 and skect2 (Loft1)
   

   

5. Step 5:

   Create flex from loft 1 (Flex1), choose twisting, checklist hard edge, angle=45 degrees, and trim plane1 distance=50mm
   

   

6. Step 6:

   Create circle with diameter=130mm on top plane like picture below (sketch3),
   

   

7. Step 7:

   Create boss-extrude the sketch3 like picture below (boss-extrude1), choose mid plane direction with depth=40mm
   

   

8. Step 8:

   Create cir-pattern loft1 (cir-pattern1), checklist the equal spacing, spacing=360 degrees, and instances=3.
   

   

9. Step 9:

   Create dome with depth=40mm like picture below
   

   

10. Step 10:

    Finish