How to use spinal bend command in PTC creo 2 .

Mohit Saxena

22 Sep, 2014 05:08 PM

Tutorial:"How to use spinal bend command in PTC creo 2 "

1. Step 1:

   Step 1: Spinal Bend is used to bend a solid along a spine...
   First create a solid
   

   

2. Step 2:

   Step 2: Go to Engineering<Spinal Bend command
   

   

3. Step 3:

   Step 3: Select the option select spine if you already have a spine otherwise sketch spine
   

   

4. Step 4:

   Step 4: First select the solid that is to be bent and then select the sketching plane and keep sketching view as default
   

   

5. Step 5:

   Step 5: Draw the spine... Here I have drawn two lines and a arc in between them just make sure that arc is tangent to both your lines... you may use fillet command for arc
   

   

6. Step 6:

   Step 6: Select the plane about which the solid is to be bent
   

   

7. Step 7:

   Step 7: Your solid will be bent according to the sketched spine