Inspection Fixturing Fast
Fast 3D holding fixture
How to create a 3D printable holding fixture for inspection.
This is how I create fixtures fast for part holding.
-
Step 1:
First Step open the model of the part you want to create the fixture for.
-
Step 2:
Create a block that is bigger then the block
-
Step 3:
Bring the block and the model in to the same window then do combine under the
Insert tab / features and Combine
-
Step 4:
In this option do a Subtract and remove the one part from the other part.
-
Step 5:
Now you have a model of cavity of the part
-
Step 6:
Do some cutting and remove the parts of the fixture that you don't want.
Now you can 3d print this fixture to hold your part for inspection.