Tutorial - Creating Forming tool (Sheet-metal) in SolidWorks?
Here is the tutorial.
-
Step 1:
Start SolidWorks in part mode.
-
Step 2:
Top plane>>Sketch.
-
Step 3:
Draw a circle of 50mm diameter.
-
Step 4:
Under Features tab choose Extruded boss/base.
-
Step 5:
Choose Draft and enter an angle of 30º. Click OK.
-
Step 6:
Under Features tab click Fillet.
-
Step 7:
Select the top face of the part and keep the default radius. Click OK.
-
Step 8:
Now we have the body of the forming tool. Now we have to define the sketch used for defining the forming tool position.
-
Step 9:
Bottom face>>Sketch.
-
Step 10:
Under Sketch tab click Convert entities while selecting the bottom face.
-
Step 11:
The base will be converted. Now exit the sketch and open the Design library from the task pane. Point to forming tools.
-
Step 12:
Click Autoshow to fix the task pane.
-
Step 13:
Now drag the part1 from the tree view to the design library lower window.
-
Step 14:
Enter a name for forming tool & Click Save.
-
Step 15:
Now we can use it as forming tool.