Tutorial - Fill pattern in Solidworks?
Here is the tutorial.
-
Step 1:
Start SolidWorks in Part mode.
-
Step 2:
Front plane>>sketch and draw a circle.
-
Step 3:
Extrude it.
-
Step 4:
Front face>>Sketch.
-
Step 5:
Make a circle.
-
Step 6:
Extrude it.
-
Step 7:
Again select the front face>>sketch.
-
Step 8:
Select the outer edge and convert entities. Exit the sketch.
-
Step 9:
Now reference geometry>>axis.
-
Step 10:
Select right plane and origin. Click OK.
-
Step 11:
Now choose fill pattern.
-
Step 12:
Select the sketch4 as the fill boundary.
-
Step 13:
Select Axis1 as the direction.
-
Step 14:
Select boss-extrude2 as the feature to pattern.
-
Step 15:
Change pattern layout to square and enter both distances to 20.
-
Step 16:
Click OK and we have fill pattern layout.