Tutorial how to model a propelling pencil (13)
part 8
-
Step 1:
open a sketch on the front plane and draw an centerline like this
-
Step 2:
draw shown sketch
-
Step 3:
continue
-
Step 4:
add this line
-
Step 5:
now please open the sketch and fix this dimension. it must be 1,3mm
-
Step 6:
use revolve command
-
Step 7:
your body must be like this
-
Step 8:
use fillet command
-
Step 9:
now pen a sketch on this surface
-
Step 10:
draw shown sketch..
-
Step 11:
use cut-extrude command. select one of lines and tick the thin feature box. please attention marked places.
-
Step 12:
right click on the sketch and click on show
-
Step 13:
make same things for the other lines
-
Step 14:
now hide the sketch
-
Step 15:
save the part 8
next: http://grabcad.com/questions/tutorial-how-to-model-a-propelling-pencil-14