Tutorial how to model a propelling pencil (15)

Aykut Dana

1 May, 2012 03:22 PM

part 10

1. Step 1:

   open a sketch on the front plane and draw a centerline
   

   

2. Step 2:

   start the drawing
   

   

3. Step 3:

   continue
   

   

4. Step 4:

   make your sketch finally like this
   

   

5. Step 5:

   use revolve command
   

   

6. Step 6:

   use fillet command
   

   

7. Step 7:

   referance geometry-- plane . select the front plane and enter the distance
   

   

8. Step 8:

   open a sketch on the new plane
   

   

9. Step 9:

   draw a rectangle
   

   

10. Step 10:

    continue..
    

    

11. Step 11:

    use trim command
    

    

12. Step 12:

    use extrude command. select up to surface option and select the pink surface. confirm that
    

    

13. Step 13:

    use mirror command. select mirror plane (front plane) and features to mirror( boss extrude 1)
    

    

14. Step 14:

    open a sketch on this surface
    

    

15. Step 15:

    draw a circle
    

    

16. Step 16:

    use cut-extrude command. tick the ''flip side to cut'' box
    

    

17. Step 17:

    save the part 10
    

    

18. Step 18:

    please don't try to make a assembly file at the moment. I will show how to make it soon

    http://grabcad.com/questions/tutorial-how-to-model-a-propelling-pencil-16