Tutorial - Modeling Checkers board in SolidWorks?
Here is the tutorial.
-
Step 1:
Top plane>>Sketch.
-
Step 2:
Draw a box of 250x250.
-
Step 3:
Extrude it by 20mm.
-
Step 4:
Shell.
-
Step 5:
Select lower face and distance be 5mm.
-
Step 6:
Fillet the otuer edges by 5mm.
-
Step 7:
Top face>>Sketch.
-
Step 8:
Draw a Square of 200x200.
-
Step 9:
Convert it to construction geometry.
-
Step 10:
Draw a box and it's length be 1/8 of the bigger box height.
-
Step 11:
Linear Sketch pattern.
-
Step 12:
Select the box to pattern about x-axis at distance of 25mm 8 times.
-
Step 13:
Again Linear patttern all boxes about the y-axis 8 times at 25mm.
-
Step 14:
Exit the sketch. Curves>>Project Curves.
-
Step 15:
Select the sketch and top face.
-
Step 16:
Top Face>>Sketch.
-
Step 17:
Draw a center-point rectangle of 220mm.
-
Step 18:
Split line it on the top face too.
-
Step 19:
Select the face and then appearence.
-
Step 20:
Select Face.
-
Step 21:
Select all Odd faces.
-
Step 22:
Color them Orange.
-
Step 23:
Similarily color all even boxes white.
-
Step 24:
The outer area be black.
-
Step 25:
The rest of body be wooden appearence.
-
Step 26:
And we have the board prepared