Tutorial - Modeling Crank arm in SolidWorks?
Here is the tutorial.
-
Step 1:
Top plane>>Sketch.
-
Step 2:
Draw this sketch.
-
Step 3:
Extrude it at mid-plane by 94mm.
-
Step 4:
Top plane>>sketch.
-
Step 5:
Use line tool and make this sketch. These lines are tangent.
-
Step 6:
Mid-Plane by 20mm.
-
Step 7:
Fillet.
-
Step 8:
Select these edges at 5mm.
-
Step 9:
Again fillet and select this edge.
-
Step 10:
We have the crank arm.