Tutorial - Simulation of Plummer block under torque?
Here is the tutorial.
-
Step 1:
Start SolidWorks and open the attached model.
-
Step 2:
Under simulation tab choose study advisor>>new study.
-
Step 3:
Let's keep the settings to default and select type Statis and click OK.
-
Step 4:
Under fixture advisor select fixed geometry.
-
Step 5:
Select the inner faces of the body of casting where the bolts will make it fixed.
-
Step 6:
Now we can see the green arrows. These arrows indicate that the body is fixed here.
-
Step 7:
Under refernce geometry select axis.
-
Step 8:
Select the circular face and click OK.
-
Step 9:
Under External loads select Torque.
-
Step 10:
Select the inner face and axis1 as the direction.
-
Step 11:
Enter the torque value of 100 & click OK.
-
Step 12:
Now click Run.
-
Step 13:
Now we have the analysis result of the plummer block under torque.