Tutorial - Wrap feature in Solidworks?
Here is the Tutorial.
-
Step 1:
Start Solidworks.
-
Step 2:
Sketch>>Right Plane.
-
Step 3:
Make a circle let dia be 100mm.
-
Step 4:
Extrude it by 200mm.
-
Step 5:
Sketch>>Top Plane.
-
Step 6:
Choose Normal to view or press ctrl+8.
-
Step 7:
Make a centre line that passes through the axis and coincident with the centres of both the circular faces.
-
Step 8:
Choose Text in Sketch tab.
-
Step 9:
Choose the centre line as the curve.
-
Step 10:
Type in the text. For example GrabCAD.com.
-
Step 11:
Adjust the alignment (center) and the size of the text (let be 48mm).
-
Step 12:
Click OK and exit the sketch.
-
Step 13:
Choose Wrap in the features tab.
-
Step 14:
Select sketch2.
-
Step 15:
The wrap feature property manager will show.
-
Step 16:
Choose the cylinderical face.
-
Step 17:
Change the emboss height to 10mm.
-
Step 18:
Click OK. The Embossed text appears.
-
Step 19:
Click Wrap1 and choose edit feature.
-
Step 20:
Change wrap type to Deboss.
-
Step 21:
Click OK and you can see that this time the text is dugged into the cylinder.
-
Step 22:
Again edit the feature and this time choose Scribe.
-
Step 23:
Click OK and you can see the scribed sketch on the cylinderical face.