Tutorials

  • Modeling ×
  • blend ×

Using Advanced Blend Option in Creo Parametric

jehan kothari
in Modeling
17 2 Intermediate
The video shows complete 2d to 3d Modeling as well as advanced use of loft option
PTC Creo Parametric tutorial advanced tangent blend parametric creo

Creo Parametric 5.0 3D Modeling Tutorial

jehan kothari
in Modeling
13 0 Beginner
Creo Parametric 5.0 3d Modeling Tutorial. In this video, I have demonstrated a very simple 3d model. This is for those who know part modeling commands in Creo Parametric. I am not explaining "how extrude works" or similar things. You can find the drawing in below link of pinterest account.
PTC Creo Parametric blend modeling 3d beginners absolute parametric creo

Filling basic 6-sided holes in Rhino

Bobi
in Modeling
8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

BOUNDARY BLEND IN CREO 3.0

Jasper Aaron
in Modeling
3 0 Beginner
BOUNDARY BLEND in CREO 3.0. Its is a Surface tool which works same as SWEPT BLEND From solid.
PTC Creo Parametric surface blend boundary ptc 3-0 creo

Filling 6-sided holes in Rhino

Bobi
in Modeling
3 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by complex surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

SIEMENS NX 11: Edge Blend: Whole Command Explained

Anand Panchal
in Modeling
3 0 Beginner
A Tutorial for Siemens NX 11 for Beginner. All Options in Command are explained by its Use. Variable Radius Corner Setback Stop Short of Corner Length Limit Overflow
NX Unigraphics unigraphics radius command blend edge fillet nx siemens

[Tutorial Video] Advanced 3D Modeling Interview Tool Test - Creo Parametric

jehan kothari
in Modeling
2 1 Intermediate
In this video, I am creating an advanced 3d model from the 2d drawing. But I have separately explained on how to approach a 3d model while you are facing an interview tool test. I have step by step explained my modeling process and hope you enjoy it :) Blend, Hole, Pattern etc are few commands included.
PTC Creo Parametric blend modeling 3d advanced parametric creo

Clean, easy to edit shape with Loft and Blend surface

Bobi
in Modeling
1 0 Beginner
Clean, easy to edit shape with Loft and Blend surface
Rhino industrial fillet smooth design box blend surface loft

Converting a metal tube with 3 mm fillets to an aluminum extrusion

Bobi
in Modeling
1 0 Beginner
Converting a metal tube with 3 mm fillets to an aluminum extrusion
Rhino tube corner blend surface smooth fillet transition design

Filling basic 6-sided holes in Rhino (ver. 2)

Bobi
in Modeling
1 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

Blend surface - Advanced Planar sections (tutorial 1)

Bobi
in Modeling
1 0 Beginner
Blend surface with advanced "Planar sections" option
Rhino section planar transition nurbs surfacing surface blend rhino

CREO _ Model

UNITED MEDIA
in Modeling
1 2 Beginner
A mechanical component of the machine lever/connector has modeled using PTC CREO parametric software. It can be easily modeled by the variable section sweep command.
PTC Creo Parametric swept blend sweep variable machine lever handle parametric

Filling basic 6-sided holes in Rhino (ver. 3)

Bobi
in Modeling
1 0 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

Match surfaces manually

Bobi
in Modeling
1 0 Intermediate
One disturbing issue with "Match surface" is that it will try to transfer the 1st and 2nd row of control points to the target edge while keeping the distances between them relatively unchanged. This is usually great for the majority of users, because it's predictable and even usable in specific cases. However, there must be an option to "unclock" the aforementioned correlation between the 1st and 2nd row of control points and instead let "Match surface" adopt the same distances as the target control points. With that option turned on, the surface to be matched will become perfectly matched to the target one. To demonstrate the HUGE advantage of a potential "Adopt" option that I just described, here is a simple way to achieve the necessary correlation between the 1st and 2nd row of control points by "mirroring" the distances from the target surface to the opposite one. Lets hope that "McNeel" will consider adding such an option in the future releases of Rhino.
Rhino blend 3d cnc curvature tangent class-a surface match

Blend surface - Advanced Planar sections (tutorial 2)

Bobi
in Modeling
1 0 Beginner
Blend surface with advanced "Planar sections" option
Rhino rhino blend surface surfacing nurbs transition planar section
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.