Tutorials

  • sketching ×

Suspension & Steering Geometry (Front) | 4 Wheeler | Double Wishbone | Anti-Ackerman

A Square C & D
in Modeling
6 9 Intermediate
In this video tutorial, i have shown how to make Front Suspension and Steering geometry of a 4 wheeler. Here, I have taken an All terrain Vehicle(ATV) suspension and steering system for reference, but same approach can be applied while designing for Standard cars and other vehicles. Only the parameters will change according to the type and dynamics of the vehicle. Suspension type- Double Wishbone Steering geometry type- Anti-ackerman Model link:- https://grabcad.com/library/suspension-and-steering-geometry-4-wheeler-1 Basic Parameters used :- 1. Wheelbase= 55 inches 2. Trackwidth= 52 inch (Front and Rear same) 3.Front Ground clearance= 15 inches 4. Rear Ground clearance= 14 inches 5. KPI angle= 7° 6. Castor angle= 12° 7. Knuckle length= 6 inches 8. Spindle length= 120 mm 9. Spindle length (for wheel nut)= 75 mm 10. Steering Arm length= 80 mm 11. Steering Arm angle with spindle= 110° 12. Tyre Outer Diameter= 23 inches Please note that these parameters are used just for educating and learning purpose. Concrete calculations and certain other important factors related to Vehicle dynamics and Handling along with suspension analysis are considered and performed before designing any suspension and steering system of any vehicle. But these values are close to the standard industry values. I also used them in various college level projects. So they can be used as reference values. If you found the video informative, please Hit the Like button, Comment any doubts/issues related to the content in the video and Please share among your friends and colleagues. Stay tuned with us for more contents related to Designing and Racing game-plays.
SOLIDWORKS wishbone double wheeler geometry steering suspension sketching solidworks

GO-KART CHASSIS | STEERING GEOMETRY | 3D-SKETCH | SOLIDWORKS | CAD

A Square C & D
in Modeling
14 4 Intermediate
In this video tutorial, I have made 3D-sketch of a Go-kart chassis. This video will help college students/fresher who are new to Solidworks, CAD designing, Sketching and also who are interested in Automobiles. Mainly for Mechanical engineers, yet anyone having interest can watch it.
SOLIDWORKS engineering mechanical automobile go-kart tutorial 3d-sketching sketching cad solidworks

Mirror vs Dynamic Mirror

jehan kothari
in Modeling
1 2 Beginner
The video takes you through the tour on Mirror and Dynamic Mirror Command. Give it time and I assure you are going to learn a lot if you are a beginner.
SOLIDWORKS sketching dynamic entities mirror tutorial solidworks

SolidWorks - Move, Copy, Stretch, Scale, Rotate

jehan kothari
in Modeling
3 2 Beginner
In this video of Mastering the SolidWorks, I am explaining how to Move, Copy, Rotate, Stretch Entities. The video goes deeper in how "Keep Relations" affect all the options and few shortcuts to copy and move entities.
SOLIDWORKS beginner stretch scale rotate copy move sketching solidworks

Sketcing Android Character in SolidWorks

jehan kothari
in Modeling
0 0 Intermediate
In this video we are sketching the Android Character.
SOLIDWORKS tutorial sketching advanced android sketch solidworks

Tutorial designing arduino nano casing v1.0 casing sketching and fitting solidworks part 9

Rixtronix LAB
in Modeling
0 0 Beginner
Donation from Rixtronix LAB for the community, please enjoy, thanks :) Tutorial designing arduino nano casing v1.0 casing sketching and fitting solidworks part 9 https://www.youtube.com/watch?v=1Fsq7TLtwW0&list=UU89se0BZ2oGeqN5jNbDAyQQ&index=31
SOLIDWORKS part solidworks fitting sketching v1-0 casing nano arduino designing tutorial

Tutorial designing arduino nano casing v1.0 casing sketching and fitting solidworks part 7

Rixtronix LAB
in Modeling
0 0 Beginner
Donation from Rixtronix LAB for the community, please enjoy, thanks :) Tutorial designing arduino nano casing v1.0 casing sketching and fitting solidworks part 7 https://www.youtube.com/watch?v=iEVJcq9yqLs&list=UU89se0BZ2oGeqN5jNbDAyQQ&index=22
SOLIDWORKS part solidworks fitting sketching v1-0 casing nano arduino designing tutorial

AutoCAD Beginner's Guide

PRASHANT YADAV
in Drafting
4 0 Beginner
Hey guys this tutorial mainly focuses on the basics of 2d drafting. You will get full info about the this CAD Software and will be able to draft any sketch in this software.
AutoCAD sketching autocad cad-cam drafting 2d

Sketching in creo for beginners

mohammed haris
in Modeling
0 0 Beginner
Basic steps for learning to sketch in creo for beginners.
PTC Creo Parametric drawing basics solidworks sketching creo

Solidworks 3D Sketching tutorial - 3D ATV SKETCH

A Square C & D
in Modeling
3 0 Intermediate
IN THIS VIDEO, I HAVE EXPLAINED AND PERFORMED 3D SKETCHING BY MAKING A 3D SKETCH OF A BAJA BUGGY AND LATER ADDING PIPING TO THE SKETCH BY USING WELDMENTS FEATURE. I HAVE ALSO EXPLAINED IN-DEPTH WELDMENT FEATURE. HOW TO MAKE GROOVES AND CORRECTING THEM AT A SPECIFIC POINT, HOW TO TRIM AND EXTEND THE GROOVES IN THE PIPING.
SOLIDWORKS youtube grabcad industry automotive sketching cad solidworks education

Tutorial : How to make sketching plane parallel to screen in Creo 2.0?

Rahul
in Design & CAD
2 0 Intermediate
Just a tweak in the Creo settings will get it done. Follow the steps.
PTC Creo Parametric screen plane creo 2-0 sketching how make parallel

Mouse CAD designing -Solidworks surfacing tutorial

A Square C & D
in Modeling
1 0 Intermediate
This video is about how to make CAD model of a computer mouse using quick surfacing technique in Solidworks software. Important features of Surfacing like Surface extrude, surface sweep, trims, surface fill, fillets, etc are demonstrated in the video. The model can be downloaded from this link- https://grabcad.com/library/mouse-computer-cad-modelling-1
SOLIDWORKS designgyan grabcad youtube solidworks sketching surfacing modelling cad

Solid Edge 3D Modeling Design video tutorials Basic to Advanced

CAD CAM Learning
in Modeling
1 0 Beginner
Hello everyone, I am a Solid Edge user, I would like to share my knowledge about Solid Edge and hopefully my video tutorials will help someone who is learning Solid Edge.
Solid Edge sketching video training modeling 3d tutorials edge solid

Creating Instantaneous Centre in Soldiworks

A Square C & D
in Modeling
0 0 Beginner
Hello everyone. In this video, I have demonstrated how to locate Instantaneous centre front double wishbone suspension for the BAJA ATV using simple 3D modeling features in Solidworks.
SOLIDWORKS sketching solidworks 2024 youtube double wishbone geometry suspension baja

Fundamentals

Ibtisam Shehri
in Modeling
0 0 Beginner
In this tutorial I will try to shed light on the very basics of Computer-aided design (CAD) using Solidworks 2016. We will be focusing on 2D sketching, which is the first step for getting started with 3D modeling.
SOLIDWORKS cad sketching 2d sketch dimension modeling 3d modeling solidworks
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.