Drawing a sample piece

22255d73

14 Nov, 2016 02:24 PM

A sample piece drawing is as follows.

1. Step 1:

   Click on the profile icon and create a piston shape like a free hand
   Draw profile halfway
   

   

2. Step 2:

   Click on the Limit icon and set the required size limitations.
   

   

3. Step 3:

   Exit Sketch and click the Shaft icon to select the axis of reference that axis
   Turn around to make the piece.
   

   

4. Step 4:

   Click on the Chamfer icon to chamfer the pistol and select the edge,
   Create it.
   

   

5. Step 5:

   Draw a milling edge to mill the edge of the shaft and use the symmetry command
   Carry this surface to the other side.
   

   

6. Step 6:

   Click the icon to mill the edges.
   

   

7. Step 7:

   Draw a circle to project from the milling surface of the piston.
   

   

8. Step 8:

   Click the pad icon or make a protrusion
   

   

9. Step 9:

   Create this pad on the other surface using the symmetry icon.
   

   

10. Step 10:

    Make a hole by clicking the hole icon
    Using the Profile icon, create the geometry on the bottom surface of the piston.

    

11. Step 11:

    Create the geometry on the bottom surface of the piston using the Profile icon
    

    

12. Step 12:

    Create a geometric hole by clicking on the Pocket icon.
    

    

13. Step 13:

    Again using the spline command to curve to the piston side surface
    Create it.
    Milling along the geometry by clicking on the Pocket icon.
    

    

14. Step 14:

    Fillet icon to create the required surface radius
    To make various static analyzes of this part we have created
    Let's assign stuff.
    

    

15. Step 15:

    By pressing the view icon, the color of this material on the screen
    See properties.