Tutorial - Modeling a Cup Point in SolidWorks?

Sudhir Gill

23 Feb, 2012 05:05 PM

Here is the tutorial.

1. Step 1:

   Start SolidWorks in Part mode.
   

   

2. Step 2:

   Top plane>>Sketch.
   

   

3. Step 3:

   Draw a circle of 10mm.
   

   

4. Step 4:

   Extrude it by 50mm.
   

   

5. Step 5:

   Top face>>Sketch.
   

   

6. Step 6:

   Draw a circle of 9mm.
   

   

7. Step 7:

   Extruded cut with check the flip side to cut at 45º draft enabled.
   

   

8. Step 8:

   Top face>>Sketch.
   

   

9. Step 9:

   Draw a polygon with parallel dimension 5mm.
   

   

10. Step 10:

    Extrude cut at 5mm.
    

    

11. Step 11:

    Inside face>>Sketch.
    

    

12. Step 12:

    While selecting the face click convert entities.
    

    

13. Step 13:

    Extruded cut.
    

    

14. Step 14:

    Draft at 60º.
    

    

15. Step 15:

    Bottom face >> Sketch.
    

    

16. Step 16:

    A circle of 8mm dia.
    

    

17. Step 17:

    Extruded cut at 45 degree draft with flip side to cut.
    

    

18. Step 18:

    Bottom face>>Sketch.
    

    

19. Step 19:

    A circle of 5mm dia.
    

    

20. Step 20:

    Extruded cut at 60º draft angle.
    

    

21. Step 21:

    And we have the part body.