Tutorial - Modeling cup headed bolt in SolidWorks?
Here is the tutorial.
-
Step 1:
Start Solidworks in part mode.
-
Step 2:
Top plane>>Sketch.
-
Step 3:
Draw a square of 7.5mm side by using center rectangle tool.
-
Step 4:
Extrude it by 7.5mm.
-
Step 5:
Top face>>Sketch.
-
Step 6:
Draw a circle of 3.75mm radii tangent to the sides of the box.
-
Step 7:
Extrude it by 50mm.
-
Step 8:
Front Plane>>Sketch.
-
Step 9:
Use Spline tool and make this profile.
-
Step 10:
Close it and use trim to erase the half entity.
-
Step 11:
Revolved Boss/base.
-
Step 12:
Revolve it.
-
Step 13:
Now we have the Part.
-
Step 14:
After making threads.