Tutorial - Modeling Rounded counter sunk bolt in SolidWorks?

Sudhir Gill

25 Feb, 2012 07:37 AM

Here is the tutorial.

1. Step 1:

   Top plane>>sketch.
   

   

2. Step 2:

   Draw a circle of 15mm dia.
   

   

3. Step 3:

   Extrude it by .625mm.
   

   

4. Step 4:

   Dome feature.
   

   

5. Step 5:

   Select Top face and input the length be 1.5mm.
   

   

6. Step 6:

   Bottom face>>sketch.
   

   

7. Step 7:

   While selecting the bottom face click convert entities.
   

   

8. Step 8:

   Extrude it by 3mm and 45º draft.
   

   

9. Step 9:

   Bottom face>>Sketch.
   

   

10. Step 10:

    Click Convert entities.
    

    

11. Step 11:

    Extrude it by 30mm.
    

    

12. Step 12:

    Chamfer.
    

    

13. Step 13:

    Lower edge at 1mm and 45º.
    

    

14. Step 14:

    Front plane>>Sketch.
    

    

15. Step 15:

    Draw this rectangle.
    

    

16. Step 16:

    Extrude cut through all in both direction.
    

    

17. Step 17:

    Now we have the part body.
    

    

18. Step 18:

    After cutting threads.