Tutorial - Swept twist in SolidWorks?
Here is the Tutorial.
-
Step 1:
Start SolidWorks in Part mode.
-
Step 2:
Top Plane>>Sketch.
-
Step 3:
Draw a spline.
-
Step 4:
Exit the sketch. Now Reference Geometry>>Plane under surfaces or features tab.
-
Step 5:
Select the spline.
-
Step 6:
Now select the end point of the spline. It will create a plane normal to spline coincident to the end point.
-
Step 7:
Now Plane1>>Sketch and draw any closed entity.
-
Step 8:
Exit the sketch and select Swept Boss/base under features tab.
-
Step 9:
Select the sketch on plane1 as the profile.
-
Step 10:
Select the spline as the path and under options change orientation/twist type to twist along path.
-
Step 11:
Change define by to turns and enter value of 8 or something similar.
-
Step 12:
Click OK and we have the feature genearted.