Tutorials

  • Simulation & CAE ×
  • Process ×
  • mesh ×

How to do a Basic Linear Finite Element Analysis in CATIA V5

Pedro José Silva Campos
in Simulation & CAE
9 2 Intermediate
After this tutorial, hopefully you will be able to do a simple linear analysis using FEM (Finite Element Method). The steps are straight forward and the part used is available in my profile (foot peg - ATV). The idea behind this is seeing how it reacts to a Pressure of 125 KPa. All the units in this tutorials are in the IS (International System) but i will put the conversions Metric-Imperial. IF YOU HAVE ANY DOUBTS SUCH AS WHERE ARE THE COMMANDS LOCATED DON'T HESITATE TO CONTACT ME. Pedro José Silva Campos
mises von atv element finite catia catiav5 mesh fem

Autodesk Inventor Tutorial - How to Simulate the Basic Static Stress Analysis

Ardi Noerpamoengkas
in Simulation & CAE
5 0 Beginner
This tutorial is about how to simulate the basic static stress of a cantilever beam. The simulation use the default mesh settings. The feature is updated on June 2, 2019.
inventor autodesk mesh simulation stress static fem cae

Simplification Surface and Surface Mesh

Maxime Chagnot
in FEM
4 0 Beginner
https://youtu.be/XQ0Q6M66ToM This tutorial shows you how to transform a multi-patches surface into a clean surface. With the surface simplification functionality, you can merge patches together and obtain a proper surface. Combined with the healing feature, you fill the small gaps and connect all the patches together. To verify if the surface you can offset it to see if it is fully healed. The final step is to open the SIMULIA Structural Model Creation application, to mesh the surface and see why is it useful to clean the surface first.
CATIA mesh patches transformation design shape generative 3dexperience catia

Car wheel rim finite element analysis

Ali Baba
in FEM
4 1 Beginner
Learn how to use SesamX, Salome and FreeCad to create a finite element simulation of a car wheel rim. This tutorial is composed of 4 steps: 1) How to prepare the rim geometry for meshing using FreeCad. 2) How to mesh the rim using Salome. 3) How to analyze the rim deformation using SesamX. 4) And how to visualize the results using Salome. You can consult the detailed wheel rim tutorial for a deeper presentation: https://www.sesamx.io/doc/tutorials/car_wheel_rim The geometry used for this tutorial is provided by Henry: https://grabcad.com/library/car-rim-132
freecad mesh fea

Abaqus CAE mesh inclination

S. B.
in FEM
4 1 Beginner
Mesh inclination with Abaqus CAE
inclination mesh abaqus

Autodesk Inventor Tutorial - How to Simulate the Static Stress with Local Mesh Control

Ardi Noerpamoengkas
in Simulation & CAE
3 0 Intermediate
This tutorial is about how to simulate the static stress of a cantilever beam with local mesh control. The simulation use the default mesh settings. The feature was updated on June 6, 2019.
inventor fem refinement control mesh local stress static simulation cae

Solid Mesh Partitioning SIMULIA 3DExperience R19x

Maxime Chagnot
in FEM
3 0 Beginner
https://youtu.be/dnP31eBoB4g Hello All! Today I present you a SIMULIA 3DExperience R19x Tutorial! You will first design a pipe using CATIA. Then copy you will insert abstraction shape to copy the original part. The partitioning will be performed in the abstraction shape. We will add material and then apply a quad-dominant mesh to our part.
hex fem simulation structural pipe mesh simulia catia

Surface Mesh Partitioning SIMULIA 3DExperience

Maxime Chagnot
in FEM
2 0 Beginner
https://youtu.be/P2kIKmlpzbo Hello Hello! Here is another video about SIMULIA 3DExperience R19x! 2 weeks ago I published a tutorial for SOLID meshing in SIMULIA Application (https://youtu.be/dnP31eBoB4g). So this time it will be about SURFACE meshing. It is a bit different because the partitioning will be performed on Generative Shape Design with the feature split. You will copy the original design in the abstraction shape and apply a material to the 3DPart. Then you will finish by applying the mesh to the surface by using the constraint lines previously created from the split. Do no hesitate to add comments or send me message about new topics for instance! Please subscribe and visit our website: http://www.plm-technology.com/ Use Captions and Enjoy :)
partitioning catia 3dexperience quad surface mesh pipe simulia

Autodesk Inventor Tutorial - How to Simulate the Basic Modal Frequency Analysis

Ardi Noerpamoengkas
in Simulation & CAE
2 0 Beginner
This tutorial is about how to simulate the basic modal frequencies of a cantilever beam. The simulation use the default mesh settings. The feature is updated on June 3, 2019.
simulation inventor autodesk vibration frequency modal cae mesh

Autodesk Fusion 360 Tutorial - How to Simulate the Static Stress with Adaptive Mesh Refinement

Ardi Noerpamoengkas
in FEM
1 0 Intermediate
This tutorial is about how to simulate static stress with adaptive mesh refinement on Autodesk Fusion 360. It was uploaded on October 20, 2018.
cae fem mesh refinement stress static simulation

Sphere of influence and Coordinate system in ANSYS - Tutorial

yogesh Rajput
in FEM
1 0 Intermediate
In this video you can find the use of SPHERE OF INFLUENCE tool for mesh in ansys and you will also learn how to generate COORDINATE SYSTEM in ansys.
mesh meshing ansys fem fea sphereofinfluence

Solidworks Simulation │FEA basics│

Ali Nasser
in Simulation & CAE
1 0 Intermediate
The FEA basic for solidworks simulation. FEA Definition Element types solid element vs shell element beam element invalid taper beam Mesh Definition Element Definition Node Definition chick list for solidworks simulation
mesh taper invalid beam shell vs solid types element definition basic fea

Autodesk Fusion 360 Tutorial - How to Simulate the Static Stress with Basic Mesh Generation

Ardi Noerpamoengkas
in FEM
1 0 Beginner
The tutorial is about how to simulate static stress with basic mesh generation on Autodesk Fusion 360. This tutorial was uploaded on October 13, 2018.
mesh cae fem simulation stress static

Pinch tool in ANSYS - Tutorial

yogesh Rajput
in FEM
1 0 Beginner
In this video you can find the use of pinch tool in ANSYS for mesh
pinch mesh analysis fem fea ansys pinchtool

Autodesk Fusion 360 Tutorial - How to Simulate the Static Stress with Local Mesh Control

Ardi Noerpamoengkas
in FEM
0 0 Intermediate
This tutorial is about how to simulate static stress with local mesh control on Autodesk Fusion 360. It was uploaded on October 20, 2018.
cae fem mesh stress static simulation
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.