Tutorials

Tutorial: How to get a helix on a spline/curve/polyline in Catia V5

16 2 Beginner
The Helix curve function in Catia V5 only allows a helix on an axis or a line. But there is a trick to create a helix on a spline/curve or polyline.

Spring Design In Catia V5

5 3 Intermediate
-

Tutorial: How to model helical spring in Catia V5?

5 1 Beginner
Modeling a helical spring in Catia V5.

Create rectangular spring in AutoCAD

5 1 Intermediate
How to create rectangular spring in AutoCAD easy and faster. Command used: Line, fillet, join, helix, extrude, intersect, extractedges, circle, dan sweep. Enjoy this video!

Barrel spring - intersect command - catia v5

3 0 Intermediate
here you can find how to create a varying diameter helical spring using advanced tools in catia

How to simulate a compression spring in Catia V5?

3 0 Beginner
Tutorial: Simulation of a compression spring in Catia V5?

Shock Absorber Preload Analysis using CATIA Generative Structural Analysis (FEA)

2 0 Expert
This BND TechSource video shows how to use CATIA Generative Structural Analysis (FEA) to prove the following: 1) The spring rate will be linear when the spring has a consistent (evenly spaced) pitch and a constant diameter. 2) Preloading the spring on the coil over assembly will NOT change the rate of the spring. 3) Preloading the spring on the coil over assembly WILL affect the deflection at load (length at load) of the shock absorber. Please visit us at: https://bndtechsource.wixsite.com/home Compression Spring calculations with FEA results (Excel): https://docs.google.com/spreadsheets/d/1zuos7ku2lzUF9r2k7wINmk1g3dGYyvwg/edit?usp=sharing&ouid=114849995441101610372&rtpof=true&sd=true

Tutorial - Modeling Spring in AutoCAD using extrude face?

2 0 Intermediate
This video illustrates all the steps involved in making this 3D spring model

Catia Basics - How to make a spring using rib and helix command

1 0 Beginner
How to make a spring using rib and helix command

How to model a simple spring in AutoCAD?

1 1 Beginner
Tutorial about modeling a simple spring in AutoCAD.

Non-linear helix in Catia

2 0 Intermediate
swept helix in CATIA

Square spring

0 0 Beginner
See video its very easy for beginner

Tutorial - Modeling Spring in AutoCAD using extrude face?

0 0 Beginner
Here is the tutorial.

Helical Spring Design With Catia

0 1 Beginner
You can see the coil spring design I made with catia from the pictures below

How to make 3D spring profile in AutoCAD

0 0 Intermediate
This video illustrates all the steps involved in making this 3D spring model