Tutorial - Modeling a Hook bolt in SolidWorks?
Here is the tutorial.
-
Step 1:
Start SolidWorks in part mode. Front plane>>sketch.
-
Step 2:
Make a closed profile like this one.
-
Step 3:
Extrude it by 10mm.
-
Step 4:
Top face and then sketch.
-
Step 5:
Draw a circle.
-
Step 6:
Extrude it.
-
Step 7:
Chamfer.
-
Step 8:
The top edge at 1mm.
-
Step 9:
After sweep cutting it will like this.