Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

Sudhir Gill

8 Mar, 2012 06:17 AM

Here is the tutorial.

1. Step 1:

   Sketch >> Front plane.
   

   

2. Step 2:

   Draw this spline.
   

   

3. Step 3:

   Revolve it about the axis as a surface.
   

   

4. Step 4:

   Sketch >> Top plane.
   

   

5. Step 5:

   Draw this profile.
   

   

6. Step 6:

   Extrude it as a surface.
   

   

7. Step 7:

   While selecting the revolved surface goto Edit >> Pattern.
   

   

8. Step 8:

   Select Extrude surface as the trimming object direction be inside.
   

   

9. Step 9:

   Right click Extrude surface and then hide.
   

   

10. Step 10:

    Select the leaf and then Edit >> Geometry pattern.
    

    

11. Step 11:

    About axis 6 times.
    

    

12. Step 12:

    Select the first surface and then Edit >> Thicken.
    

    

13. Step 13:

    Thicken it.
    

    

14. Step 14:

    Similarily thicken other surfaces.
    

    

15. Step 15:

    Insert >> Revolve.
    

    

16. Step 16:

    Click Placement and then define.
    

    

17. Step 17:

    Select Front plane.
    

    

18. Step 18:

    Draw this profile.
    

    

19. Step 19:

    Revolve it.
    

    

20. Step 20:

    We have the flower body.