Tutorials

  • Assemblies ×
  • printing ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

NASA satellite design

Alaa Saeed
in Assemblies
3 0 Expert
In this tutorial I will show how to design a model body of a satellite.. But here I I do the assembly part of the design, I'm gonna upload the completed tutorial to the whole design later in couple days. Here you can see the finished design and the assembly , the model of the design has advanced surface modeling and creating references planes, I also used many techniques and tools in this design . you can watch the tutorial in my channel here: https://www.youtube.com/channel/UChBJUvguK4FujlGxRhQNb-A
SOLIDWORKS design mechanical model aerospace cad printing 3d solidworks

CYCLONE

Alaa Saeed
in Assemblies
1 0 Intermediate
Milling machine, device that rotates a circular tool that has a number of cutting edges symmetrically arranged about its axis; the workpiece is commonly held in a vise or similar device clamped to a table that can move in three perpendicular directions.
SOLIDWORKS mechanical design printing 3d catia cad solidworks

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding

Solidworks Tutorial - Assembly Of Fidget Spinner

Anuj Kaushal
in Assemblies
0 0 Beginner
Basic Solidworks tutorial using assembly tool. I have used the 3D design of fidget spinner for this tutorial. 3D Design - https://grabcad.com/library/fidget-spinner-85
SOLIDWORKS bearing printing assembly design 3d spinner fidget
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.